MFJ-203 BANDSWITCH DIP METER
Current Bid: $ 61.00  
 

MFJ-203 BANDSWITCH DIP METER

You are bidding on a MFJ-203 Bandswitch Dip Meter, instructions included.  This meter is a solid state bandswitch adaptation of the traditional grid dip meter.  MFJ replaced the external turning coils, which are lost or misplaced with a bandswitch.  The MFJ-203 uses one external coil to couple the circuit under test.  Using the MFJ-203 you can make several measurements.  Read the resonant frequency of a tuned circuit or antenna directly from the Tune scale.  Find the value of an unknown capacitor or inductor.  Measure 1/4 wave frequencies or velocity valocity factor of a feed line.  Find the approximate Q of  a resonant circuit or RF inductor.  The MFJ-203 can also be used as a signal generator.

The MFJ-203 covers all ham bands from 10 meters to 160 meters.  The dial calibration is approximate and for reference only.  Approximate frequency coverage is as follows.

Band A: 1.75 to 3.2 MHzBand B: 3.2 to 6.1 MHzBand C: 6.2 to 12.2 MHzBand D: 11.7 to 23.1 MHzBand E: 17.3 to 34.8 MHz

This requires a 9-volt DC transistor battery or can be powered using a 9 to 12 volt, 100mA, filtered and fused, DC power supply.

Winning bidder pays $14.00 Expidited mailing (insured and Delivery Confirmation)   Payment is due 3 days after auction item closes, or items will be relisted.  Please email me if you have any questions, I will be listing the remainder of my fathers HAM Radio Equipment over the next couple of months, so check back.

Click HERE for more information about this item.